Specification & Standards –
- The straight connector 200SR/G meets the requirements of CENELEC HD 629.1.
Technical Characteristics –
- A thick conductive EPDM jacket provides a total safe to touch screen.
- Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
Design –
Separable connector comprising:
- Conductive EPDM insert.
- Conductive EPDM jacket.
- Insulating EPDM layer.
- Type A interface as described by CENELEC EN 50180 and 50181.
- Conductor contact.
- Earthing lead.
- Cable reducer.
The screen break design enables cable outer sheath testing without removing or dismantling the connector
| Separable Connector Type | Current Ir (A) | Voltage Um (kV) | Conductor Sizes (mm2) | Diameter Over Insulation (mm) | ||
|---|---|---|---|---|---|---|
| Min | Max | Min | Max | |||
| K200SR-12 | 250 | 12 17.5 |
25 | 95 50 |
13.0 | 21.0 |
| K200SR-16 | 250 | 17.5 24 |
50 25 |
95 | 17.5 | 25.0 |
