Description
LV & MV Cable Repair Joints
PWASR Wraparound sleeves close easily with a permanent locking system that consists of a raised rail profile and a stainless steel channel. These sleeves are mainly used as insulation for 1C low-voltage power cables and for rejacket repair up to 66 kV or for general sealing applications. Hot-melt adhesive provides a secure environmental seal. They also have an unlimited shelf life, when stored under normal conditions.
Test Parameters | Test Method | Test Requirement |
---|---|---|
Tensile strength | ISO R – 527 | 18 MPa min. |
Ultimate elongation | ISO R – 527 | 400% min. |
Tensile strength after aging at 120oC for 168 hrs. | ISO R – 527 | 16 MPa min. |
Ultimate elongation after aging at 120oC for 168 hrs. | ISO R – 527 | 300% min. |
Dielectric strength | ASTM D – 149 | 20 kV/mm min. |
Water absorption | ASTM D – 570 | 0.2% max. |
PWASR | ||||
Size(mm) | As Supplied(mm) | After Recovered(mm) | Standard Length | |
D (Min.) | d (Max.) | w (Min.) | ||
42/8 | 42 | 8 | 2.0 | 250 to 1500 mm |
55/10 | 55 | 10 | 2.3 | 250 to 1500 mm |
62/22 | 62 | 22 | 2.5 | 250 to 1500 mm |
76/22 | 76 | 22 | 2.5 | 250 to 1500 mm |
101/30 | 101 | 30 | 3.0 | 250 to 1500 mm |
122/38 | 122 | 38 | 3.3 | 250 to 1500 mm |
139/38 | 139 | 38 | 3.3 | 250 to 1500 mm |
160/55 | 160 | 55 | 3.5 | 250 to 1500 mm |
190/55 | 190 | 55 | 3.5 | 250 to 1500 mm |
Reviews
There are no reviews yet.